FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [September 2016 Threads]
I'm integrating FreeRTOS on this processor and just read the readme under .../portable/GCC/ARM_CM7
. In a nutshell it suggests that one use that port if you have an r0p1
core and use the .../ARM_CM4F
port otherwise.
Happy to follow that advice but wanted to double check that the FPU support is consistent. The F767 has an r1p0
core with a FPv5-DP-D16-M FPU. I believe the 16 DP registers are the same as with the FPv4 that the Cortex-M4F uses and that might be all the RTOS cares about.
Anyone see any issues?
Thanks,
Kenny
No, I don't see any issues. It should be fine.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.