FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [October 2011 Threads] Demo EFM32 not runPosted by Braun on October 27, 2011 Does the demo run on the EFM32 Board EFM32G290F128? The Board has no LCD. I have to use the external bus, or? how do I implement this?
RE: Demo EFM32 not runPosted by Richard on October 27, 2011 If the demo uses and LCD, and your board does not have an LCD, then it goes without saying that you will not be able to view anything on the LCD that is not there. As far as the EMF32 port goes, it is 'just' a Cortex-M3, so the port will run on any Cortex-M3 from any manufacturer.
Regards.
RE: Demo EFM32 not runPosted by Braun on October 28, 2011 Yes, thank you. But, If the software comes to the point "Performs USART2 SPI Transfer" -> "/* SPI address */" ->while (!(usart->STATUS & USART_STATUS_TXC)) ; nothing is happens.
RE: Demo EFM32 not runPosted by Dave on October 28, 2011 To translate Richard's reply. The Cortex-M3 port runs on any Cortex-M3 device, but there is a difference between a port and a demo. The demo just targets a port at a particular hardware platform or development board. If you are using a hardware platform other than that targeted by the demo you may have to make some changes to get the demo running. Normally this is restricted to changing the port pins used for LED outputs or button inputs. In your case, if there is no LCD, then remove any code that is trying to communicate with the LCD, especially if it is expecting the LCD to reply to commands.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|