FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [May 2012 Threads]
I am trying to start off from an updated freeRTOS implementation for my RDB1768v2 board. I found integration between the freeRTOS and the nxp libraries and cmsis a confusion with the official example :
http://www.freertos.org/FreeRTOS_Support_Forum_Archive/March_2011/freertos_FreeRTOS_RDB1768_examples_with_LPCXpresso_4394988.htmlthen I found the contributed source from Richard
http://www.freertos.org/Interactive_Frames/Open_Frames.html?http://interactive.freertos.org/forums . It seems to be the best place to start ( this port uses the CMSIS 2.0 and the peripheral library of nxp).
However I wanted to start from scratch and not with full load of extra files, and I'm not sure if the project is suitable for my board, so I decided to delete off the FreeRTOS IO files, and face some mem files error (apparently it uses the heap2 configuration, I'm not familiar with this, so I copy the heap3 file from the official port). I can compile and run for now, but I really cant be sure if this is a good configuration. I will like to know:
1) Is there any particular configuration/files I should take note of? The code seems to be written for the LPCXpresso Base Board BSP, and I am using the RDB1768v2 (same LPC1769 chip though). Also, can I actually just delete those files from the project? The files I have deleted are:
FreeRTOS-Plus-CLI folder
FreeRTOS-Plus-IO folder
FreeRTOSIOConfig.h
FreeRTOS_IO_BSP.h
printf-stdarg.c
Examples,FatFS,IwIP folder, change heap_2.c to heap_3.c
2) I hope it's not too demanding, I will really appreciate if there's a strip down version of that project. (i.e. with the freeRTOS i/o and cli removed).
Any input will be much appreciated :)
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.