FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [May 2010 Threads] FreeRTOS port for LPC3250?Posted by XschwarziX on May 13, 2010 Hi there! Has anybody ported FreeRTOS to the LPC3250 µC using GCC? This is a ARM926EJ-S core...... -> FreeRTOS port including the MPU support! ?
Are there any hints for porting? I think the STR9 (ARM9) port could be adapted for this case? Because the cores are nearly the same! Ok, support for floating point must be used (portSAVECONTEXT and portRESTORECONTEXT)
thx in adavance
RE: FreeRTOS port for LPC3250?Posted by MEdwards on May 14, 2010 Getting basic FreeRTOS running on any ARM9 should be easy, but utilizing the MPU will be harder. Is the MPU the same as the one used on the Cortex M3?
RE: FreeRTOS port for LPC3250?Posted by XschwarziX on May 17, 2010 Hi! OK running FreeRTOS on ARM9 is easy (there is already a port for e.g. STR9) - the LPC3250 uses a VFP. Does anybody know which registers i've to save on contextswitch at stack.?
I don't know anything about he MMU of the CM3.... sry...... what's the problem using the MMU?
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|