all:

I create those tasks to run
sys_thread_new("USB", usb_task, NULL, configMINIMAL_STACK_SIZE, USB_TASK_PRIO);
sys_thread_new("LED",led_task, NULL, configMINIMAL_STACK_SIZE, LED_TASK_PRIO);
sys_thread_new("DHCP", dhcp_task, NULL, configMINIMAL_STACK_SIZE, DHCP_TASK_PRIO);
sys_thread_new("POWER",power_task, NULL, configMINIMAL_STACK_SIZE, RS485_TASK_PRIO);
sys_thread_new("RELAY",relay_task, NULL, configMINIMAL_STACK_SIZE, RS485_TASK_PRIO);
sys_thread_new("OLED", oled_task, NULL, configMINIMAL_STACK_SIZE*2, OLED_TASK_PRIO);
sys_thread_new("COM", serial_task, NULL, configMINIMAL_STACK_SIZE*2, COM_TASK_PRIO);
sys_thread_new("TELNET",telnet_task, NULL, configMINIMAL_STACK_SIZE*2, TELNET_THREAD_PRIO);
sys_thread_new("HTTP", http_task, NULL, configMINIMAL_STACK_SIZE*2, HTTPSERVER_THREAD_PRIO);
sys_thread_new("SSL", ssl_server, NULL, configMINIMAL_STACK_SIZE*8, HTTPSERVER_THREAD_PRIO);

except those, TCPIP and ethernet task are also running background, I found that SSL task can't start, I set the #define configTOTAL_HEAP_SIZE( ( size_t ) ( 16 * 1024 ) )
I thinik the size is enough. but why the task with 1024B can't work.

vincent

Without knowing what configMINIMAL_STACK_SIZE is, nobody will be able to answer your question for definite, and do you really mean the task can't start, or that the task can't be created. If it is that the task can't be created, then the assumption is you have simply run out of heap space, so 16K is not enough. Remember when defining a task stack size you are specifying it in works, not bytes, to on a 32 bit architecture (you didn't mention the architecture either) if configMINIMAL_STACK_SIZE is set to 256, then defining a task to be 8*configMINIMAL_STACK_SIZE will allocate 8K bytes. (8 * 256 * 4).

See http://www.freertos.org/a00111.html and http://www.freertos.org/a00125.html

Hope this helps.

Regards.

Hi rechard:

thank you for your useful link.
I am working on porting PolarSSL in FreeRTOS, it is almost succesful. if you need, I could release to you .

by the way , there is a demo project that FreeRTOS runs in SumSung S5PV210 processor platform ?

vincent

Hi Rechard:

I knew that FreeRTOS integerate CyaSSL in application level, but CyaSSL is not full free in some point, I am watching on this a long time event discuss it with CyaSSL company ,. I hope SSL should be open as FreeRTOS. just a wish.


vincent

I think the licenses for Polar and CyaSSL are very similar, they are both GPL v2 / Commercial dual licensed, so I'm not sure what the distinction is there.

Regards.