FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [July 2006 Threads] Where is uip GCC SAM7X demo?Posted by John Q. Publick on July 27, 2006 In April there was a lot of discussion regarding work on a uip GCC port for the sam7x. What happened to this?
Thanks
- Joe
RE: Where is uip GCC SAM7X demo?Posted by Richard on July 27, 2006 In short, not sure. The longer answer is:
There is a GCC port for the SAM7X that uses lwIP. It would not be a difficult job to take out the lwIP source and add the uIP source, as you can use the uIP/IAR source code as a base to see which files you need to include.
I also have some other GCC SAM7X ports that don't have uIP in them but are more optimised for code size. These were sent to me from a third party so cannot support them directly (although obviously I will help where I can). If you want a copy then let me know.
Can you send me a link to the April thread so I know which you are referring to and can refresh my memory of what was said and/or done.
Regards.
RE: Where is uip GCC SAM7X demo?Posted by John Q. Publick on July 28, 2006 Here are the two threads from April:
http://sourceforge.net/forum/message.php?msg_id=3700971 http://sourceforge.net/forum/message.php?msg_id=3703497
- Joe
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|