FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [January 2012 Threads] UART in PIC24 Project not working properlyPosted by Bopamo Osaisai on January 13, 2012 I am playing around with the PIC24 FreeRTOS project (V7.1.0) on the Explorer16 development board and I'm having problems with the UART driver included in the demo. It is not transmitting the right characters to the hyperterminal. I have gone as far as gutting the entire project and all that is left is a task that transmits a single character and transmission seems to be garbled. I've run the project on different verified hardware but I am still having the same consistent issue.
Has anyone else had similar issues with the UART? If so, how was it rectified?
Thank you!
RE: UART in PIC24 Project not working properlyPosted by Dave on January 13, 2012 Is it just a baud rate problem. Does the chip you are running have the same clock assumed in the baud rate calculation?
RE: UART in PIC24 Project not working properlyPosted by Bopamo Osaisai on January 13, 2012 Yes, you are right. I took a closer look at my baud rate calculations and noticed that my oscillator configurations were slightly off. I changed them and it seems to be working fine now.
Thank you!
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|