|
|||||||||||||||
FreeRTOS Support ArchiveThe FreeRTOS support forum is used to obtain active support directly from Real Time Engineers Ltd. In return for using our top quality software and services for free, we request you play fair and do your bit to help others too! Sign up to receive notifications of new support topics then help where you can.
Loading
UART in PIC24 Project not working properlyPosted by *anonymous on January 13, 2012 I am playing around with the PIC24 FreeRTOS project (V7.1.0) on the Explorer16 development board and I'm having problems with the UART driver included in the demo. It is not transmitting the right characters to the hyperterminal. I have gone as far as gutting the entire project and all that is left is a task that transmits a single character and transmission seems to be garbled. I've run the project on different verified hardware but I am still having the same consistent issue. Has anyone else had similar issues with the UART? If so, how was it rectified? Thank you! UART in PIC24 Project not working properlyPosted by davedoors on January 13, 2012 Is it just a baud rate problem. Does the chip you are running have the same clock assumed in the baud rate calculation? UART in PIC24 Project not working properlyPosted by *anonymous on January 13, 2012 Yes, you are right. I took a closer look at my baud rate calculations and noticed that my oscillator configurations were slightly off. I changed them and it seems to be working fine now. Thank you!
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|
|||||||||||||||
NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.
Meet Richard Barry and learn about running FreeRTOS on RISC-V at FOSDEM 2019
Version 10.1.1 of the FreeRTOS kernel is available for immediate download. MIT licensed.
View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.
FreeRTOS and other embedded software careers at AWS.
