FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [January 2012 Threads] Error when using Openocd in freertos tutorialPosted by hawkhawk on January 28, 2012 Hello,
I am following the steps in the following tutorial: http://www.elektronikpraxis.vogel.de/fileserver/vogelonline/files/419.pdf
I arrived at launching the external tool: "OpenOCD Programmer", but I am having the following problem in the console:
Info: openocd.c:84 main(): Open On-Chip Debugger (2006-11-22 14:00 CEST) Error: ft2232.c:164 ft2232_write(): FT_Write returned: 4 Error: ft2232.c:346 ft2232_send_and_recv(): couldn't write MPSSE commands to FT2232
Knowing that the drivers are properly configured in windows, how can I proceed to identify the source of the problem?
Thanks.
RE: Error when using Openocd in freertos tutorialPosted by hawkhawk on January 28, 2012 Well, it worked.
The board was powered from a USB hub without mains power, which lead to the inability to write anything to it.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|