FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [January 2008 Threads] FreeRTOS and at91sam7x256 udp question!?Posted by bojal204 on January 30, 2008 Hi, I am using AT91SAM7X256 board with IAR EWB and initialise the communication between EMAC and DAVICOM with autonegotiation exactly the freeRTOS have done? Now i want to implement a udp protocol for send and recieve packets. But i want to do it without any rtos. Anyone have done it and can explain how to me or link me some tips? I would be greatful for this. Thanks
Best Regards Bojan
RE: FreeRTOS and at91sam7x256 udp question!?Posted by Dave on January 31, 2008 You might like to try the uIP mailing list for uIP specific information.
RE: FreeRTOS and at91sam7x256 udp question!?Posted by bojal204 on February 5, 2008 Hi again. I just wanted to ask how I can create my own project based on freertos. I only need some ethernet, rs232 and I/O port management. This far i've implemented the ethernet based on BasicEmac example from IAR but really can't hande the udp right. So my question is how to start from scratch with freertos without the demo application. Thank you
Regards Bojan
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|