FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [February 2009 Threads] ARM7_LPC2106_GCC Example working?Posted by Harald Kubota on February 23, 2009 Hi,
When I tried to make an LPC2103 work with the LPC2106 gcc FreeRTOS demo work, I thought "That's gonna be easy". Well, it is not.
I am at my wits end. I know the board works. The compiler is good, the linker too, I modified the obvious suspects (crystal frequency change to 19.66MHz from 14.xMHz, change of multiplier/divider for the PLL accordingly, change of the linker file to reflect the smaller flash and RAM of the LPC2103 vs. LPC2106, I use ARM only).
Yet I don't get a single blinking LED out of it. Same when using an LPC2148 (similar configuration changes). Unfortunately I do not have the Olimex 2106 board.
Is that ARM7_LPC2106_GCC demo working for anyone?
Harald
RE: ARM7_LPC2106_GCC Example working?Posted by Colin Tan on February 23, 2009 Try removing all the tasks except the flash task. also you will need to verify that the pins are configured right. eg pin select block and dir. I would suspect the RAM difference is the main problem.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|