FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [December 2011 Threads] Problem with Codevision AVR,Posted by jediel on December 27, 2011 how to change atmega128 in port.c
/* Hardware constants for Timer1. */ #if (defined _CHIP_ATMEGA128_) | (defined _CHIP_ATMEGA64_)
/* ATmega64, ATmega128 chips, Timer 1 runs in Mode 4 */ #define portCLEAR_COUNTER_ON_MATCH ( ( unsigned portCHAR ) 0x08 ) // WGM13=0 WGM12=1 #define portPRESCALE_64( ( unsigned portCHAR ) 0x03 ) #define portCLOCK_PRESCALER ( ( unsigned portLONG ) 64 ) #define portCOMPARE_MATCH_A_INTERRUPT_ENABLE ( ( unsigned portCHAR ) 0x10 )
#else #error please modify Timer1 hardware constants to suit your chip #endif
with atmega2560, please?
RE: Problem with Codevision AVR,Posted by MEdwards on December 27, 2011 I don't think there is an official Codevision port for the AVR, but I guess it will be the same no matter what compiler is used. Do any of the ports here help? http://interactive.freertos.org/entries/20782373-freertos-winavr-port-for-atmega128-atmega1284p-at90can128-atmega169-atmega16
You can also ask on avrfreaks.net
RE: Problem with Codevision AVR,Posted by jediel on December 28, 2011 oh i see, but not understand with winavr,
thanks,
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|