FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [December 2010 Threads] FreeRTOS for LM3S5XXX in Red Suite 3Posted by Bob Myles on December 22, 2010 Can anyone point me to a Code Red, Red Suite (using v3.2.6) port of FreeRTOS for the TI/Luminary LM3S5XXX processors? I'm using the LM3S5632, but I can convert accordingly.
Alternatively, can someone recommend the closest relative in the standard ports? I tried looking over the LPC1768 ports; but there appear to be a number of differences to research that might take longer than converting a TI/Luminary example.
RE: FreeRTOS for LM3S5XXX in Red Suite 3Posted by sotd on December 22, 2010 Red Suite has a FreeRTOS wizard that will get a project up for you.
The LM3S micro is a cortex M3 so and Red Suite uses GCC, so the source in freertos/source/portable/gcc/ARM_CM3 is what you need in any case. You need to populate the vector table with FreeRTOS interrupts as well.
RE: FreeRTOS for LM3S5XXX in Red Suite 3Posted by Bob Myles on December 23, 2010 @sotd: Thank you for your kind and thorough reply. I succeeded easily after I located the wizard of which you spoke and copied the relevant IRQ handlers to the c_startup.c file from the demo program that you also recommended.
You help is most appreciated.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|