|
|||||||||||||||
FreeRTOS Support ArchiveThe FreeRTOS support forum is used to obtain active support directly from Real Time Engineers Ltd. In return for using our top quality software and services for free, we request you play fair and do your bit to help others too! Sign up to receive notifications of new support topics then help where you can.
Loading
FreeRTOS port for CC1310Posted by bapgobears on August 7, 2017 I see a port for the TI CC3200 Launch Pad, but not the TI CC1310 part. The former is an M4 ARM Cortex while the latter is an M3 ARM Cortex. What port would I start with to get something running quickly on the CC1310? Any description of what has to be done is appreciated. Thanks, Brett FreeRTOS port for CC1310Posted by rtel on August 7, 2017 FreeRTOS will run on any Cortex-M part, but you need to ensure you have the right port layer. If the part is a Cortex-M3 or a Cortex-M4 (without floating point unit) then you need to use the FreeRTOS/Source/portable/[compiler]/ARMCM3 port layer. If the part is a Cortex-M4F (with floating point unit) then you need to use the FreeRTOS/Source/portable/[compiler]/ARMCM4F port layer. You can find some instructions on creating a new FreeRTOS project on the following link: http://www.freertos.org/Creating-a-new-FreeRTOS-project.html Alternatively, you can adapt a project: http://www.freertos.org/porting-a-freertos-demo-to-different-hardware.html Hope that is helpful. FreeRTOS port for CC1310Posted by bapgobears on August 8, 2017 Thanks for the speedy support! I'll give that a try.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|
|||||||||||||||
NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.
Meet Richard Barry and learn about running FreeRTOS on RISC-V at FOSDEM 2019
Version 10.1.1 of the FreeRTOS kernel is available for immediate download. MIT licensed.
View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.
FreeRTOS and other embedded software careers at AWS.
