|
|||||||||||||||
FreeRTOS Support ArchiveThe FreeRTOS support forum is used to obtain active support directly from Real Time Engineers Ltd. In return for using our top quality software and services for free, we request you play fair and do your bit to help others too! Sign up to receive notifications of new support topics then help where you can.
Loading
FreeRTOS+TCP network interface port layer requirement!Posted by pgsaslam on August 31, 2016 We use Xilinx Zynq ZC702 platform with FreeRTOS+TCP for our applications. I have a requirement of upgrading the "Network Interface Port Layer" as defined in to support two interfaces, one whereby packets are sent via ethernet interface of Xilinx Zynq ZC702 and other via our custom applications. Is this possible by just modifying the Network interface port layer or other modifications are also required? Kindly clarify? FreeRTOS+TCP network interface port layer requirement!Posted by rtel on August 31, 2016 Without a deeper understanding of what it is you are trying to do it is difficult to say for sure. We do however have an experimental version of FreeRTOS+TCP that supports multiple interfaces (with different IP address, MAC addresses, etc.).
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|
|||||||||||||||
NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.
Meet Richard Barry and learn about running FreeRTOS on RISC-V at FOSDEM 2019
Version 10.1.1 of the FreeRTOS kernel is available for immediate download. MIT licensed.
View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.
FreeRTOS and other embedded software careers at AWS.
