FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [August 2011 Threads] Eclipse debug error LM3SXXXPosted by OCCAM on August 7, 2011 I think I've configured Eclipse Indigo properly
I can edit, compile and program the MCU on the LM3S6965 evaluation board. Verified by making a code change that is reflected on the display. I can't seem to get debugging working.
Open OCD seems to be running
Info: openocd.c:92 main(): Open On-Chip Debugger (2007-08-17 11:00 CEST)
When I initiate debug session I get Error while launching command: gdb --version
What's wrong?
RE: Eclipse debug error LM3SXXXPosted by sven-de on August 8, 2011 Have you installed GDB? If you have, then try connecting to your target via the GDBs telnet interface. This usually offers better indication of what's wrong.
RE: Eclipse debug error LM3SXXXPosted by OCCAM on August 8, 2011 Yes GDB is installed ... I'll have look at the telnet interface .. .thanks
RE: Eclipse debug error LM3SXXXPosted by OCCAM on August 9, 2011 OK ... one more step up the learning curve .... GDB is not GDB.exe when using Code Sorcery Lite, it's "arm-none-eabi-gdb.exe"
So Now the debugger runs, but will not stop at break points .... I get little yellow "yield" signs at the breakpoint. Sheesh ... what a pain in the arse!
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|