FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [August 2007 Threads] ST91x IAR Ver 5.0 PortPosted by johanan on August 29, 2007 Got IAR ver 5.0 (and not 4.x) and looks like startup file and vector file (91x_init.s, 91x_vect.s) of this port are not compatible. I tried to make the minor changes, but unfortunatly am very new to IAR and ARM programing, and no luck (cant get read of some linker error, and not 100% sure that I am doing the right changes). can anyone help? Thanks Johanan
RE: ST91x IAR Ver 5.0 PortPosted by Dave on August 31, 2007 Richard - when is V5 support going to happen?
RE: ST91x IAR Ver 5.0 PortPosted by Richard on August 31, 2007 Version 5 does not yet support the Cortex M3 processors. When Cortex M3 is supported I will update the IAR projects to use V5.0. Until then I have not even looked at V5.
A new V4.x version was released at the same time as V5. This is what I upgraded to and am currently using.
Regards.
RE: ST91x IAR Ver 5.0 PortPosted by johanan on August 31, 2007 I am tring to do it while learning the ARM9 assembler, so I probably make a lot of mess (but learning somthing). I already got the led flashes but have the stack (both CSPR and SVC_SPR) inflating. Is there is some document on how freeRTOS work at the low level of the ARM port? Johanan
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|