FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [April 2007 Threads] Willing to do rtos app with mega32.Posted by Nobody/Anonymous on April 20, 2007 Hello Forum, I have some experience in microcontroller programming but i want to do RTOS application with my atmega32 microcontroller using IAR C Compiler.I need step by step knowledge for it becoz i never have done a simple application using RTOS.Please help me n one more thing i have no any development evaluation kit like STK500 or else i want to do it without board silly question but its true i have no any knowledge about implementation of RTOS.
please help me.
RE: Willing to do rtos app with mega32.Posted by Nobody/Anonymous on April 20, 2007 Its a long time since I looked at it but I think the existing AVR323 port will run in the AVRStudio simulator. So you can play with it with no hardware. I was using GCC, but see no reason why you could not generate an elf file from IAR and do the same thing.
RE: Willing to do rtos app with mega32.Posted by Nobody/Anonymous on April 21, 2007 Thanks for the reply but i m trying it from many days but i m not able to generte .hex file through it.I have a avr programmer by which i can program the atmega32.please guide me how can i generate .hex file.
RE: Willing to do rtos app with mega32.Posted by Nobody/Anonymous on April 26, 2007 Hello !
Runnig freeRTOS with ATmega32 is quite easy. Using ATmega323 port you have only to change few things wich are different . You can see my changes here: http://www.ez.jaqb.int.pl/websvn2/wsvn/freeRTOS_test/wersje/0.1.0/serial/serial.c?op=diff&rev=2&sc=1 and here: http://www.ez.jaqb.int.pl/websvn2/wsvn/freeRTOS_test/wersje/0.1.0/makefile?op=diff&rev=2&sc=1 (as you can see i'm beginer too :-)
I've compiled freeRTOS using avr-gcc (winavr), but it's possible to use winavr as embedded compiler in AVRStudio, and then startet new AVRStudio project using *cof* file (or something like this :-)
Jaqb -- Jakub Walczak jaqb(at)jaqb(dot)int(dot)pl
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|