FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [May 2017 Threads]
Hi,
I'm facing strange issues in initialization phasis which begins to go out of my field of expertise. I searched for any recommandations on FreeRtos website about C++ integration but I didn't find any good information about my issue (if it exists please point me to the right direction).
The fact is that when I use a C++ "new" statement, the constructor runs (checked with debugger), but several instructions latter (for instance after having build a parent class), I suddenly see the members to change value.
I think something is badly configured with my memory management, but I can't figure out what. Could anyone help ?
I'm using heap1.c and I have overloading the new operators like this :
~~~
void * operator new( sizet size )
{
return pvPortMalloc( size );
}
void * operator new
{
return pvPortMalloc(size);
}
void operator delete( void * ptr )
{
vPortFree ( ptr );
}
void operator delete
{
vPortFree ( ptr );
}
~~~
I also have made a call to _libcinitarray() see my reset handler :
~~~
void ResetHandler(void)
{
uint32_t *pSrc, *pDest;
/* Initialize the relocate segment */
pSrc = &_etext;
pDest = &_srelocate;
if (pSrc != pDest) {
for (; pDest < &_erelocate;) {
*pDest++ = *pSrc++;
}
}
/* Clear the zero segment */
for (pDest = &_szero; pDest < &_ezero;) {
*pDest++ = 0;
}
/* Set the vector table base address */
pSrc = (uint32_t *) & _sfixed;
SCB->VTOR = ((uint32_t) pSrc & SCB_VTOR_TBLOFF_Msk);
if (((uint32_t) pSrc >= IRAM0_ADDR) && ((uint32_t) pSrc < NFC_RAM_ADDR)) {
SCB->VTOR |= (1UL) << SCB_VTOR_TBLBASE_Pos;
}
SystemInit();
// Set Systick to 1ms interval, common to all SAM3 variants
if (SysTick_Config(SystemCoreClock / 1000))
{
// Capture error
while (1);
}
// Initialize board
init();
//Wait 1 ms
uint32_t start = GetTickCount();
do {
yield();
} while (GetTickCount() - start < 1);
// Initialize C library
__libc_init_array();
/* Branch to main function */
main();
/* Infinite loop */
while (1);
}
~~~
heap1 has no free(), so if you have descructors use heap4.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.