FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [January 2008 Threads] PIC24HJPosted by lafleur on January 21, 2008 In re compiling for the PIC24HJ256GP610 on the Explorer16 demo board. I noted that the LCD driver used the parallel port for LCD setup, ie: using the PMADDR. This is NOT supported on the 24HJ processor.
RE: PIC24HJPosted by lafleur on January 21, 2008 Update:
by using the lcd.c and lcd.h from the dspPIC30 demo file, I was able to build and load the demo on the Explorer16 board... no issues...
PIC24HJPosted by tinchogleria on July 5, 2017 Hi! I'm trying to compile freeRTOS demo for the PIC24FJ1024GB610 and the output when I build says:
* lcd.c: In function 'prvLCDGotoRow':
* lcd.c:148:3: error: 'PMADDR' undeclared (first use in this function)
And the same for other symbols in the same file lcd.c. I followed your advice and I replaced 'lcd.c' and 'lcd.h' from 'FreeRTOSDemodsPIC_MPLAB' folder, but it doesn't work neither.
Any idea of what could I try to solve this issue?
Thanks in advance.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|