FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [February 2009 Threads] FreeRTOS example for Posted by Eduardo Goncalves on February 19, 2009 I'm downloading the FreeRTOS demo ARM7_AT91SAM7S64_IAR into an AT91SAM7A3-EK. I'm using IAR 5.20.
This causes IAR to hang when downloading.
Any ideas?
thanks
RE: FreeRTOS example for Posted by Dave on February 19, 2009 Are the memory maps the same for the two chips?
Also when IAR downloads it runs a small script to setup the chip before debugging starts. Check the IAR example for the A3 to see if it uses the same script as the one used by the S64 example.
At what point does it hang? Any messages in the log window to give a clue?
RE: FreeRTOS example for Posted by Eduardo Goncalves on February 20, 2009 Yes the memory maps are different from 7S64 to the 7A3. But I'm using the linker and the script files from the working example and I get the 'hanging feeling' when downloading.
I try to put some errors :) in the script file to see till where it would run, but the IAR power is stronger and I cannot switch the window to the Log. I also saw some while loops in the script which I've tried to comment (just in case) but without result.
RE: FreeRTOS example for Posted by Eduardo Goncalves on February 20, 2009 Yes the memory maps are different from 7S64 to the 7A3. But I'm using the linker and the script files from the working example and I get the 'hanging feeling' when downloading.
I try to put some errors :) in the script file to see till where it would run, but the IAR power is stronger and I cannot switch the window to the Log. I also saw some while loops in the script which I've tried to comment (just in case) but without result.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|