FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [August 2011 Threads] SmartFusion device: FreeRTOS requirementsPosted by Teppo Maenpaa on August 30, 2011 Hi, all, I have a problem: When I attempt to run FreeRTOS demo application on the Microsemi Smartfusion A2F200M3, everything works fine if the Actel demo http://www.actel.com/download/rsc/default.aspx?f=A2F_EVAL_KIT_DEMO_PF was programmed to the device before FreeRTOS. However, if I attempt to run FreeRTOS with a design of my own, the demo doesn't work. Supposedly, FreeRTOS requires that the chip has been flashed to a specific state before Blinky can take action. What are the requirements for the FPGA design imposed by FreeRTOS ? If this has already been documented, please accept my apologies for not finding that piece of information myself!
RE: SmartFusion device: FreeRTOS requirementsPosted by Richard on August 30, 2011 I cannot support other peoples ports of demos, but there are official demos for the SmatFusion. See:
http://www.freertos.org/Free-RTOS-For-SmartFusion-A2F200M3.html and http://www.freertos.org/FreeRTOS-For-SmartFusion-Cortex-M3.html
as far as I recall, the demos have no reliance on anything configurable in the SmartFusion. They use the MSS (Microcontroller Sub System) which is hard wired.
Regards.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|